CAD Tools/CAD Tools.iso/programs/cad009.exe/README.1ST

Text File | 1994-04-14 | 6KB | 111 lines

April 13, 1994

AutoCAD R12 c3 Windows Patch Instructions

1. As with any software update, it is a good idea to backup your
   current installation as a precaution.  In particular, if you have
   customized acad.mnu or acad.pgp or acad.mnl or acadr12.lsp it will be
   necessary to manually take your changes into the new versions of
   these files supplied with this patch.  A complete list of files
   updated in AutoCAD R12 c3 is listed at the end of this document.

2. This patch updates the English language version of AutoCAD R12 c1,
   R12 c1a and R12 c1c to AutoCAD R12 c3; including versions already
   patched with fixc1hlp.exe and winc1c.exe.

3. The AutoCAD for Windows R12 c3 patch consists of four disks or archive
   files.  The archive files are self-extracting files that should be
   copied to an empty directory on your harddisk and then expanded.

4. You will need at least 6mb free disk space on the drive that
   contains your AutoCAD to run the patch.

   Assuming you have installed your AutoCAD for Windows on drive C in
   the acadwin directory and your floppy disk is in drive a: (or your
   archive files were expanded in the c3patch directory), to run the patch
   perform the following steps:

   a. From a DOS prompt (preferably not within Windows), type in
        c:
        cd \acadwin

   b. If you are installing from floppy disks, insert disk 1 in drive a
      and type in
        a:install a:

   c. If you are installing from a single directory, type in
        c:\patch\install c:\patch

   and follow the instructions on the screen.

5. For more information about AutoCAD R12 c3 for Windows see the
   readme.doc installed into the acadwin directory after running this
   patch.

6. Through the use of this patch your existing AutoCAD serial number
   and personalization information will be retained.  Any authorization
   codes for AME, AutoVision, or Network Authorization codes are still
   valid.  You will need to reconfigure AutoCAD.

7. Files Updated with this patch:

ACAD.EXE                  ACAD.DLL                  ACAD.XMX
ACAD3.DLL                 ACAD_ADS.XMX              ACAD_ASE.XMX
ACADADI.DLL               ACADAPP.EXE               ACADL.EXE
ACADOLE.DLL               ACADPS.EXE                ACADTB16.DLL
ACADTB24.DLL              ACADVB.DLL                ASE.EXE
ASI.DLL                   ASIDB3WM.EXE              ASIDB4WM.EXE
ASIODBWM.EXE              ASIPDXWM.EXE              ASIWBC.LIB
ASIWM6.LIB                ASIWM7.LIB                ASIWW.LIB
ATOOLBOX.EXE              DBTRANS.EXE               DDEADS.EXE
DDEBAS.EXE                DDELISP.EXE               DGSYS.DLL
DLGTEST.EXE               DSACAD.DLL                DSDLWIN.DLL
GEOM3D.EXE                GEOMCAL.EXE               PLPCC.DLL
PLPHPGL2.DLL              PLPHPLP.DLL               PLSYS.DLL
RASTERIN.EXE              README.ADS                README.AVE
README.DOC                README.DRV                SHAFT.EXE
WINADS.LIB                WINADSBC.LIB              WINADSC6.LIB
WINADSC7.LIB              WINADSHC.LIB              ADS/DRAGGER.C
ADS/ACAD.HLP              ADS/ADS.H                 ADS/ADS_PERR.EXE
ADS/ARBMAT.EXE            ADS/COLEXT.EXE            ADS/DLGTEST.C
ADS/FACT.EXE              ADS/GRAVITY.C             ADS/GRAVITY.EXE
ADS/MAGNETS.C             ADS/MAGNETS.EXE           ADS/MOUNTAIN.C
ADS/MOUNTAIN.EXE          ADS/MW30GEOM.WIN          ADS/MW30SAMP.BAT
ADS/MW30SAMP.WIN          ADS/PTEXT.C               ADS/PTEXT.EXE
ADS/SAGET.C               ADS/SLD2PS.C              ADS/SLD2PS.EXE
ADS/SQR.EXE               ADS/TADC.C                ADS/TOWER.EXE
ADS/WIN/DDECONV.C         ADS/WIN/DDEWIN.C          ADS/WIN/SHAFT.C
ADS/WIN/WINUTIL.C         ADS/WIN/WINUTIL.H         ADS/WINADS.C
ADS/WINADSBC.OBJ          ADS/WINADSC7.OBJ          ADS/WINADSHC.OBJ
ADS/WINDDE.H              ASE/ASI.H                 ASE/ASIERR.H
FONTS/CIBT____.PFB        FONTS/CIBT____.PFM        FONTS/COBT____.PFB
FONTS/COBT____.PFM        FONTS/COMPLEX9.SHX        FONTS/EUR_____.PFB
FONTS/EURO____.PFB        FONTS/FONTMAP.PS          FONTS/ISO9.SHX
FONTS/ITALIC9.SHX         FONTS/ITALICC9.SHX        FONTS/ITALICT9.SHX
FONTS/MONOTXT9.SHX        FONTS/ROM_____.PFB        FONTS/ROM_____.PFM
FONTS/ROMANC9.SHX         FONTS/ROMAND9.SHX         FONTS/ROMANS9.SHX
FONTS/ROMANT9.SHX         FONTS/ROMB____.PFB        FONTS/ROMB____.PFM
FONTS/ROMI____.PFB        FONTS/ROMI____.PFM        FONTS/SAS_____.PFB
FONTS/SASB____.PFB        FONTS/SASBO___.PFB        FONTS/SASO____.PFB
FONTS/SCRIPTC9.SHX        FONTS/SCRIPTS9.SHX        FONTS/SIMPLEX9.SHX
FONTS/TE______.PFB        FONTS/TE______.PFM        FONTS/TEB_____.PFB
FONTS/TEB_____.PFM        FONTS/TEL_____.PFB        FONTS/TEL_____.PFM
FONTS/TXT9.SHX            IGESFONT/IGESYMBS.DWG     SAMPLE/ATTREDEF.LSP
SAMPLE/BMAKE.LSP          SAMPLE/DELLAYER.LSP       SAMPLE/EDGE.LSP
SAMPLE/PTEXT.LSP          SAMPLE/XREFCLIP.LSP       SOURCE/COMPLEX9.SHP
SOURCE/ISO9.SHP           SOURCE/ITALIC9.SHP        SOURCE/ITALICC9.SHP
SOURCE/ITALICT9.SHP       SOURCE/MONOTXT9.SHP       SOURCE/ROMANC9.SHP
SOURCE/ROMAND9.SHP        SOURCE/ROMANS9.SHP        SOURCE/ROMANT9.SHP
SOURCE/SCRIPTC9.SHP       SOURCE/SCRIPTS9.SHP       SOURCE/SIMPLEX9.SHP
SOURCE/TXT9.SHP           SUPPORT/ACAD.DCL          SUPPORT/ACAD.MND
SUPPORT/ACAD.MNL          SUPPORT/ACAD.MNU          SUPPORT/ACAD.MSG
SUPPORT/ACAD.PGP          SUPPORT/ACAD.PSF          SUPPORT/ACADR12.LSP
SUPPORT/ACADWIN.HLP       SUPPORT/AI_UTILS.LSP      SUPPORT/APPLOAD.LSP
SUPPORT/ASE.DCL           SUPPORT/BASE.DCL          SUPPORT/CHTEXT.LSP
SUPPORT/DDATTDEF.LSP      SUPPORT/DDATTEXT.LSP      SUPPORT/DDCHPROP.LSP
SUPPORT/DDGRIPS.LSP       SUPPORT/DDINSERT.LSP      SUPPORT/DDMODIFY.LSP
SUPPORT/DDOSNAP.LSP       SUPPORT/DDPTYPE.LSP       SUPPORT/DDRENAME.LSP
SUPPORT/DDSELECT.LSP      SUPPORT/DDUCSP.LSP        SUPPORT/DDUNITS.LSP
SUPPORT/DDVIEW.LSP        SUPPORT/DDVPOINT.LSP      SUPPORT/DLINE.LSP
SUPPORT/FILTER.LSP        SUPPORT/MVSETUP.LSP